Search results

Well, setting up my new aquarium, I'm connecting all my Hydros gear. I should have documented how I had it connected, but I didn't. Anyway, I have "Collection is Broken". Tried numerous connections, still no dice. Current connectivity: Kraken with terminator connected to X4 to WEv2 to XS to...

Yea, I get it. I was upgrading my tank and wanted to reuse the aquarium for a setup in the bedroom. I went with the Launch because it would cover the setup well. I should have not mounted it under the UV. Oh well, on me. I already have it out of the cabinet. Was hoping it would dry and...

Water got in. hmmmm....

I just setup a Launch for my RS 200G2. While trying to take out the quartz sleeve for my UV, I dripped water on the Launch and now it's not working. I let it try and now it kinda boots up but flashes Red and White - Drive ports 3 and 4 bounce back and forth on the Red. Am I outta luck?? I...

Seems it wasn't in this thread. Go here - Sicce SDC 7.0 Pump connection to Kraken Force Port 24v

Well, there you go. Then it should work like I have it for the ReefRun 7000, 5500, and the SDK300 DC skimmer. Just follow the pin out and I believe I provided pictures in this thread. It should work. Then you have a few less power bricks to deal with.

I don't believe the Sicce pumps use any of the M16 (or any M) connector. Those are for the Red Seas....unless you are talking about the ReefRun 7000. My Sicce 3 just takes a straight barrel connector and the Force port cable is all you should need....at least for the 3.0 I have. ReefMat...

it just supplies power to the pump. You still need to control via Red Sea for the ReefRun pumps. Connecting to the Kraken is all about reducing the number of power bricks. Now for Sicce, you should be able to control them via Hydros using the Third Party integration. Just be careful on the...

This is from my latest M16 connector. The previous one I couldn't get the screws out, so I had to solder. With these below, screws were easier. Cleaner also. HTH.

This is an older one I did. I’ll have to take another picture of the latest but you have the idea

https://www.aliexpress.us/item/3256805533083254.html?spm=a2g0o.order_list.order_list_main.5.62991802F7ZB5I&gatewayAdapt=glo2usa The 4 pin one. Get the one with the screws. Pin out - Full DIY Hydros Pinout Cheat Sheet you'll need to jumper the + and - within the connector. I can provide a...

The demo pump option worked....didn't know that was there. Thanks for the tip and looking forward to the option 3. :cool:

Yea, I thought about something like that. I was playing with schedules and looking to make it dependent, but didn't do it with flow pump. A little wonky, but if it works.... Not a huge deal, more of a nice to have at this point. I guess another option is to cut my AWC volume by half.

Well, bottom line, I want to turn on a Generic output every M / W / F.

I've setup a couple of Versa pumps for my AWC.....runs great. I have the two pumps connected via a Y cable to one of the Force ports on the Kraken. I setup my schedule to run within Mobius which runs every morning. There's no way to skip days in Mobius, but was hoping to schedule power to the...

Never mind, went with the USB route. Works well.

Were you able to get that relay? They have an IoT Relay that I hear may replace that, but unsure if it would work.

Yes, I was thinking of two DC/DC boosters on one Force. Not sure what the pumps will run at. I doubt I would run either at 100%. I'm in the planning stages of an aquarium upgrade, so just looking ahead. If I review what is currently running on the Kraken in my current aquarium, it doesn't...

So, if a ReefRun 7000 power supply has an output of 4a (max) @ 24v, could I run two DC/DC boosters off of one Force port to drive two return pumps? Just curious....running low on Force ports. During a low power situation, most of the force ports will be turned off but I would like to have the...

Reefmat is 12v, so it can run off the drive port which also runs at 12v. The power connector on the reefmat is an M12. I found it on Aliexpress. I posted it here - Full DIY Hydros Pinout Cheat Sheet Sorry, I just saw this thread....