GX-12 nut and washer replacement?

[kenchilada]

I have an X4 from 2022 that has rusted GX12 nuts and washers on many of the ports. Does anyone know a replacement part that fits?

I bought some new panel mount connectors but the nuts are smaller than the Hydros ones. I didn’t want to change the ports themselves since they are not rusted, just the washer and nut.

These are the parts I need…


Here is showing size difference between original and the ones I ordered…

 

[kenchilada]

To be clear, these are the parts that go on the front ports.

 

[JeffB418]

Those can be hard to find. I would say reach out to support@coralvue.com and see if they might be able to get you some or sell you some.

Another option is to order these and use the nuts off them. But 1) they will take weeks to get and 2) they sometimes screw up orders. GX12 Connector Front Mount Straight Solder Cable 6 Pin Aviation Male Receptacles

 

[kenchilada]

Those can be hard to find. I would say reach out to support@coralvue.com and see if they might be able to get you some or sell you some.

Another option is to order these and use the nuts off them. But 1) they will take weeks to get and 2) they sometimes screw up orders. GX12 Connector Front Mount Straight Solder Cable 6 Pin Aviation Male Receptacles

Do you know those will fit? I already bought some panel mount Gx-12 connectors off amazon and those don’t fit, but I can wait if these are the right part.

I will try support also, good idea