XP8 showing incorrect wattage

[Gt4profession]

I replaced my 40 watt UV and noticed that in the app the xp8 is reading around 10 watts. I then was troubleshooting and discovered my 25 watt pump is showing 10 watts and then discovered that almost all my equipment on the xp8 is showing just 10 watts. Is there something I am doing wrong. I went and disconnected each thing and just ran one thing to discover it’s reading around 10 watts. Anyone have any input?

 

[Gt4profession]

Also checking that with nothing plugged in it is reading 10 watts

 

[JeffB418]

Reach out to support@coralvue.com and they can investigate whats going on

 

[2plus2]

Also checking that with nothing plugged in it is reading 10 watts

I noticed my controllers all giving me readings, I assume these are overall readings and by that I mean, the Board, LEDs, etc... using power = which in return display usage?

 

[Gt4profession]

I spoke with a rep and they assumed there was something wrong with the xp8. It’s suppose to give the proper reading of each device plugged in.

 

[2plus2]

I spoke with a rep and they assumed there was something wrong with the xp8. It’s suppose to give the proper reading of each device plugged in.

O i misunderstood your statement, it was per connection. Yeap those should be accurate due to the over wattage safety feature they have in the app.

 

[2plus2]

Was this resolved? I'm curious since I haven't used my XP8