CO2 Control Valve

[Gizmo71]

How do I set up the Hydros CO2 control valve to the Hydros XS4?

 

[Danny]

How do I set up the Hydros CO2 control valve to the Hydros XS4?

I think those are meant to run on a drive port which an XS does not have. The X2, X4, XD, X10, Kraken and Launch have drive ports on them.

 

[Gizmo71]

I meant how configured it in the apps.. to set timers conditions for CO2 tank injection

 

[thom_smith]

Use the calcium reactor output. That'll set parameters when solenoid opens and closes.

HYDROS Control - How To Add a Calcium Reactor

Here we will show you how to add a Calcium Reactor to your HYDROS Control

www.coralvuehydros.com

Then you'll also have seperate outputs for your reactor circulation pump and dosing pump.

 

[Gizmo71]

Use the calcium reactor output. That'll set parameters when solenoid opens and closes.

HYDROS Control - How To Add a Calcium Reactor

Here we will show you how to add a Calcium Reactor to your HYDROS Control

www.coralvuehydros.com

Then you'll also have seperate outputs for your reactor circulation pump and dosing pump.

Thanks

 

[Jerry]

The setup page says to select

• Family: Reactors
• Type: Calcium Reactor

That doesn't exist for me when I attempt to create Co2 control
I only get 5 listings from 0-10 V input, probe port,Sense port,Static port, Testor input.
There is no Reactor type to choose.
Help
Jerry

 

[Jerry]

The setup page says to select

• Family: Reactors
• Type: Calcium Reactor

That doesn't exist for me when I attempt to create Co2 control
I only get 5 listings from 0-10 V input, probe port,Sense port,Static port, Testor input.
There is no Reactor type to choose.
Help
Jerry

All good now. I don't know where my head was when I posted my concerns. I tried setting up the Ca2 Reactor later on with success.