Search results

Hotter now. It is very, very, very slowly, but steadily climbing. Assuming it will get to a point & shut itself down, hopefully anyway. I did not have this issue with 1 pump running, only when I hooked up the second. I will be going back to a brick for one it is looking like.

I have! Just today! I plan to post a how-to with photos & links later today if I get time, or tomorrow. I have two SDC 7.0's. And that has presented a whole new problem. When both pumps are on 100%, they draw too much power & Kraken shuts down one. It will run them at 75% or so, but if you are...

Jc1589, I'm hoping you can help! I'm struggling making a cable to connect my two Sicce SDC 7.0 pumps to Kraken. I'm hoping you'll take a moment to look at the thread linked below & help me...

I just had an epiphany! Why don't I open up the Sicce connector & look at how it is wired! 🤦🤦🤦I never claimed to be the sharpest knife in the drawer. 😂 Thank God I never plugged in my cable! 😂😂😂 Probably would have fried my pump! So, can anyone help me decipher what the info below & the wire...

Well, it won't let me post a video. 😭 I have a Dr appointment. I may try to plug it up when I get back. I'll report back later. Thanks for checking!

Are the numbers on your plug at the same positions as mine? Because if they are, then the pinout diagram is wrong/backwards & I have mine wired backwards. I attached a video of my plug. Now I'm really scared to plug this in! 😂

Thanks Richard! I have them wired & ready, but my buddy said something doesn't seem right once he saw that pinout diagram vs the numbers on the plug & to verify before plugging them in. BTW, no hurry! I've waited this long to get these powered up with Kraken. I'm in no hurry, I just want to make...

Hello, please see attached. The numbers on my connector don't align with the pinout diagram. Do I ignore the numbers on my connector & just go with the pinout diagram? So on my connecter 3 & 4 are ground (black) and 1 & 2 are hot (red). Please let me know your thoughts. Ken

Richard, thanks so much much for helping. Unfortunately, my friend had something come up & couldn't make it. We'll try again tomorrow.

OK, I have a buddy coming over tomorrow to help with this. To review, I cut the barrel connector off of a 24V Force Port cable & wire it per the Kraken pinout posted here. I can cut a bit extra of the force port cable to make the jumpers, correct? This may be a dumb question, but the black...

Thank you very much for that offer! I may take you up on it! I have another avenue to try, let me see how that pans out. If it doesn't, I'll definitely take you up on that. Thank you very much!

The wife & I tried this mod last night for about 2hrs & failed miserably. The screw connectors on the M16 connector & the wires themselves are just too small for us to see & work with. We can't strip the wires & get them & the jumper wires into those tiny holes with the tiny screws situated...

Not yet. I have all the parts. I decided to try to make the pigtail instead of cutting the wire between the connector & power brick. I cannot even see the screw heads on the connectors. My wife is going to need to do those 😊

I would actually get the one foot 6 in Cable in the second post in the Amazon link.

Or maybe this one in the link? https://a.co/d/5ZGfZ3v I like the right angle connector on this one!

I need to extend my salinity probe cable. It is much shorter than the others. Will the one in the attached screenshot work without having any adverse effects on signal quality and accuracy? Thank you!

Like a dumbass, I had the wrong output hooked up to Kraken. I switched and its working.

Here is a picture of the Box the pump came in I thought I threw it away but I found it it is a Varios 4-S

I believe I have the port setup correctly (a screenshot of the settings is attached) but I cannot get Kraken to power my skimmer pump. It is a Varios powering an octo INT 250. I have confirmed the power brick is 24 volt, I can get the pump to power up just fine with the power brick but I can't...

Yes, that is exactly the spot I had figured, somewhere in that stretch of cable. OK, I'm on the right track. One final question, will the barrel connectors in this link Amazon.com work for this? If so, I'll probably go that route instead of M16 connectors. I can use some heat shrinks & a...