Search results

Are you using the 0-10V output to directly drive the 12V motors? I don't see any relay controls between your input and the load. The 0-10V outputs should not be used to directly drive loads, they are very low current outputs and not designed to drive motors.

what hosing size and gear ratio did you get? trying to find a reliable source for a budget friendly ~1ml/min pump and this might be in.

App is live!

If you are typically dosing volumes smaller than optimal for the native 40ml/min rate of the Hydros Drive Port Doser, I’ve got a simple solution for you. Amazon sells a bunch of different 12VDC PWM motor speed controllers for really cheap (under $10). You can use one of these to reduce the speed...

Added a new one for those who are getting a X3/4 Pro Pack up and running for the first time: Hydros Pro Pack How To Also know you can always find these tutorials and more here! https://www.jbaquaticsllc.com/hydros-tutorials

stay tuned as well. coralvue will be releasing may more in depth resources in the future on these products

I put together a slide deck going over a few ways to interface the commonly available eTape liquid level sensors from Milone and another 3rd party company. This project will be a work in progress but here is what I have to start...

Ha. I wish. But no.

agree, love to see updated graphs and data tools. i know its on the list to do but no ETA i've heard of.

You can try a couple of things. First do your best to keep the pH probes wire physically away from any power cords. Second you could try picking up some snap on ferrite core beads on amazon, the ones that snap around cables. You could first try them on the pH cord near the controller, and then...

Yes, I would suggest using the "Constant" output setting.

API should be fixed on the Focustronic side now

Please reach out to support ASAP and they can deep dive into what could be causing this issue. Please submit a ticket by emailing support@coralvue.com today and someone will get you all fixed up!

Awesome!

Do these outputs have minimum off or on times set on them? I have see cases where modes do not trump these timers before. IE if an output has a min on time of 15 mins and let’s say the output turned on due to some other condition. Then you have a mode that has this outputs unchecked (or off)...

Have you recently deleted a device from your account? Does it still appear if you close the app and reopen completely?

The Wave Engine LE does not have 0-10v outputs. It has 0-10V inputs. You can not control the pulse 4 using the 0-10v port on the WE LE. only the x4 and full wave engine have 0-10v outputs. As for the xf350 pumps, I assume you have those on direct drive ports on the WELE. You should be able to...

I have started to compile a few google slide presentations for certain topics that involve the Hydros controller series. Here are decks that are currently available: Hydros 101: 0-10V Inputs/Outputs Hydros 101: Calcium Reactors Disclaimer: These references are produced by a 3rd party and...

I have put together a tutorial here on how to do this: Low Power Mode/Prime Power Loss Detection w/ Icecap Battery (or WE/WELE)

Normally Hydros can detect when prime/wall power is lost by using the Icecap V3 Battery backup on a wave engine. Hydros does this by seeing the drop of DC power into the wave engine from 24V wall power to 12V battery power. Then you can configure Hydros to fall back to a pre-defined "low power"...