Search results

I need to have my return pumps do an extended soft start ramp, both when I initiate a start and when the power is restored. My drain system is complex and there is significant water inertia to accelerate in my line going to the sump room (50' away). When I turn the pumps on it will raise tank...

I want to trigger an output based on a counter. For example I want a drive port to be turned off after a momentary switch is activated N times. Can this be accomplished?

Is it possible to daisy chain leak detection sensors in series to one sense port. I don't want ton of sense ports to support my leak detection strategy. Knowing which leak detector senses a leak isn't critical. For a specific area I may have a few sensors, knowing specifically which sensor...

I'm considering using one of the four 0-10v inputs to control my auto top off. There will be three float switches hooked to a single 0-10v input through a voltage divider. the voltage divider will create a 3v input when the low level switch is closed, then a 2v input when the low and fill...

There seems to be a perfect opportunity to have a standard setup program for those wishing to utilize the Balling-Bolus KH-C-Mg management approach. Hydros could have this as a standard routine where we put in appropriate parameters and it controls this water management strategy via the Maven...