Search results

Ok, so for now I can forget about those settings, right? As long as I don't have the WaveEngine it's not much use.

Thanks Carlos, I had already seen this page, but I still have doubts, because I don't have a WaveEngine, I can't follow those instructions, I have control 4

In the options of my Hydros Control 4 I see 2 options: * Low Power Exit Delay 00:00:00 * Low Power Mode Unused Could someone explain to me how they work or what they are for?

Thank you very much for the clarification, then, is there a way to permanently delete the records?

Here at the end found the pinout. Remember that the 0-10v port has 4 Inputs, each Magnetic Switch must be connected to Pin 3 and the other cable to Pin 1 or 2 or 4 or 5 For example: Pin 3 + Pin 1 = Input 1 (Switch right) Pin 3 + Pin 2 = Input 2 (Switch left) I hope this helps

Connect them following the pin layout of the GX12 connector, you will need the connector and the wiring, it is really very simple if you look at the Pin layout.

If you change the name of the Output it will delete all the records.

I bought mine on Amazon, very good quality and they arrived quickly. https://www.amazon.com/dp/B086GYJLML?ref=ppx_yo2_dt_b_product_details&th=1

This is what you have, that accessory port I understand is not enabled.

If I was thinking about that Carlos you are very right, then I could not do this integration, I would have to connect the pump outside the Hydros ecosystem, Thanks, as always.

Hello everyone, could someone guide me how to configure my Vectra M1 return pump and my ecotech backup battery to the Wifi Strip Outlet from Control 4 ? PS, I have the ecotech Booster cable from Ecotech to connect the Vectra with the backup battery. PS2, I only want to connect it to control...

Thanks Carlos

Can someone tell me how to soften the liquid detection rope to make it manageable, it is so hard that when I put it on the entire edge of my stand, parts remain in the air and do not make contact with the surface.

I am seeing that the pump of this ATO (SATO-260P) has the same characteristics of the: HYDROS ATO Auto Top-Off Kit This pump has the GX12 connector, which makes me think that I can buy a pair of 2 and 4 pin GX12 connectors and I can connect to the Hydros Control 4. Someone could you share the...

Hello, I currently have an ATO "SATO-260P" that I am very happy with how it works, is there a way I can connect this to the Hydros control 4? If possible, what accessories do I need or what procedure do I have to follow?

Thank you Danny

Currently I control my temperature with the inkbird itc-308 wifi, I have a 110v fan that helps me keep the temperature in place, in addition to a 300W Finnex heater, is there a way to integrate this Inkbird to the Hydros Control?

I am undecided to acquire with Hydros Control 4, I would like to know if in the not too distant future we will have some way to measure the salinity of the reef and it can be monitored with the current controllers.