Alarm Cutoff options

[Rescue Reef]

Hello,

I would like to have an Alarm Cutoff feature.

For example when doing water changes it is not uncommon for me to exceed set safe ranges, and trigger an alarm. I would like to be able to silence the alarm until a state change occurs, or a set period of time elapses with no clearance.
Examples:
Low temp triggers alarm during wc. I hit the ACO, and later the temperature returns to safe range for 90 seconds, that resets the alarm.

If still low after 60 minutes ACO clears and realarms
.
Temp continues to fall another x degrees.

This could be a good addition to "Advanced Settings"

Thank you for considering.

 

[Danny]

Create a output using the Alert output type at the alert level with the sound activated. That is red alert on one with normal settings. In normal mode leave the output in auto. If you are going to do work on the tank that will sound the alarm the override the output to off and the put it back to auto when done. Here is a screenshot of my settings.