ATO - DI reservoir automation

[Danny]

Do you have the other three outputs setup and the extra one since you are using a solenoid and a pump?

 

[Travis Trieloff]

Ok here is what I have now for output setup

 

[Danny]

That should work. Does the DI low output turn on when the ATO low sensor is dry?

 

[Travis Trieloff]

I have my DI Low sensor set up in the reservoir a bit higher before the pump would be dry. So DI Low output is active when sensor is dry

 

[Danny]

When you DI low sensor shows dry does the DI low output come on in the app?

 

[Travis Trieloff]

When you DI low sensor shows dry does the DI low output come on in the app?

About to test it now actually

 

[Travis Trieloff]

Ok so far it’s working DI low lit up and pump and solenoid lit up. And it’s filling

 

[Danny]

Sounds good.

 

[Danny]

Did it complete the fill OK?

 

[Travis Trieloff]

Did it complete the fill OK?

Yeah works like intended awesome thank so much

 

[Danny]

Glad to hear it is working. Glad to help.

 

[CSloan217]

Id like to add how ive done it as well, I do not have the Water Valve; yet. Even without it, I've implemented multiple safeguards. First, ive got the IceCap Smart RODI, so im able to turn off and on via a single outlet hydros plug, ive got a max time set in advanced settings. 2nd, float valve drilled into reservoir. 3rd optical water sensor for turn off of RODI. So ive got multiple redundancies set for safety and its working wonderfully from over 30 feet away.