Configuring pumps after adding to the collective

[Brisay]

Hi , just added my wave engine to my collective ( I have a control 4 and a wave engine ) As explained , the pumps will need to be reconfigured in the collective under the “
Schedules “ tab. With the old software , I had to pick each pump ( in this case , 2 gyres ) and set each pump separately as pump speed etc) now it seems you make a schedule . You do pick what type of flow, start and end time , but is there a way to customize each individual pump within the schedule ?? For example , could I run 1 gyre at 40% and the other at 60% as I did with the old software ?

 

[Don]

With both the old software and the new software all pumps assigned to a given schedule (or previously to a given Preset) run at the same speed. However in both the old software and the new software you can define max and min rages for each pump when you define the Output itself.

The capabilities are identical, they have just been moved around. Plus there are a lot of additional capabilities now.