Controlling Kessil a360WE from Wave Engin 0-10v

[waltee1000]

Hi. I am new to Hydros and trying to control kessil a360we from 0-10v output on wave engin. I got the hydros quad 0-10v cable and a 3.5mm stereo splitter jack to control the two channels. I made 2 profiles in the hydros app as explained in another post. However, through both those profiles I could control only intensity and not color. I wonder now if the splitter jack actually splits the 2 channel or internally connected to both the channels which causes to control only one in the end.

 

[JeffB418]

I don’t think that adapter cable will work. I found the method outlined here worked best for me.

Thread 'Kessil 0-10V Control Interface'
Kessil 0-10V Control Interface

 

[thom_smith]

Hi. I am new to Hydros and trying to control kessil a360we from 0-10v output on wave engin. I got the hydros quad 0-10v cable and a 3.5mm stereo splitter jack to control the two channels. I made 2 profiles in the hydros app as explained in another post. However, through both those profiles I could control only intensity and not color. I wonder now if the splitter jack actually splits the 2 channel or internally connected to both the channels which causes to control only one in the end.

As Jeff said, that isn't going to work. It is breaking on output into two identical outputs rather than a left and a right output.