Delete logs

[jcgarzagu]

hello! somebody can helpme?, i need delete all logs saved by my hydros x4.

 

[BAMatter]

Don’t think you can unless you rename the device.

 

[Danny]

Are you talking about output logs or input graphs? Output logs only hold the last 30 days I believe. I think both the outputs and inputs will start new if renamed unless you use the old name again and the data will apply to the input or output with the old name as long is it is the same type as before input or output.

 

[KWolfe81]

Don’t think you can unless you rename the device.

Yea, no logs on the WE V1:

 

[BAMatter]

I have a V1. Do you have multiple pump output tiles maybe?

 

[KWolfe81]

@BAMatter Ooops, looks like we started chatting on the wrong thread somehow. I do have multiple pump outputs but the WE is not in a collective. That's likely the issue (as the WE v1 has no internal storage)

 

[BAMatter]

@BAMatter Ooops, looks like we started chatting on the wrong thread somehow. I do have multiple pump outputs but the WE is not in a collective. That's likely the issue (as the WE v1 has no internal storage)

You’re still able to connect other devices via command bus… my V1 is part of my collective.

 

[BAMatter]

You’re still able to connect other devices via command bus… my V1 is part of my collective.

 

[KWolfe81]

You’re still able to connect other devices via command bus… my V1 is part of my collective.

Again, no collective, I don't have any other devices.

 

[BAMatter]

Again, no collective, I don't have any other devices.

Ok, you didn’t say you had no other devices, just that it wasn’t in a collective.