rroselavy
New member
Hello all-
I recently added a second pH probe input, "pH" to my X4 system on probe port 2. I calibrated that probe and all seemed to be OK.
I deleted my original pH probe input, "sump_pH" that was on probe port 1.
After deleting the "sump_pH" input, I started to receive the following notification every 30 minutes:
"sump_pH: Value -1.05 pH out of safe range"
To troubleshoot this, I reassigned my second "pH" input to probe port 1, and connected the second pH probe to the first port. Regardless, I am still receiving the notifications above.
BTW: A while back I used my "sump_pH" input to turn off my kalk feed pump, but I no longer use the kalk reactor and no longer have the kalk pump output configured in my system.
Please let me know if I am doing something wrong, or if this is a known bug.
Many thanks!
I recently added a second pH probe input, "pH" to my X4 system on probe port 2. I calibrated that probe and all seemed to be OK.
I deleted my original pH probe input, "sump_pH" that was on probe port 1.
After deleting the "sump_pH" input, I started to receive the following notification every 30 minutes:
"sump_pH: Value -1.05 pH out of safe range"
To troubleshoot this, I reassigned my second "pH" input to probe port 1, and connected the second pH probe to the first port. Regardless, I am still receiving the notifications above.
BTW: A while back I used my "sump_pH" input to turn off my kalk feed pump, but I no longer use the kalk reactor and no longer have the kalk pump output configured in my system.
Please let me know if I am doing something wrong, or if this is a known bug.
Many thanks!