Fill up container with the SOLENOID and one water level sensor.

[raullozano3]

Just joined the forum so also an intro, just caome from Apex, so starting to learn the hydros way, I am setting a hydros START just to monitor temp an control a few tasks, I am struggling with a simple program. I have a water level (one only ) and the RODI soleinoid . What I want to accomplish is when the water level hits dry to turn on the solenoid, and run for 1 hour even if the water level turns wet. I was able to accomplish this with the RODI program but the problem that program burns one of my AC outlets for a booster pump which I do not want to run, this is just to fill a container with time base. And if anyone asks what happens with an overflow scenario well the water feeds into a floating valve, hence I just want to run it for a period of time everytime the water lvl sensor hits DRY.

 

[raullozano3]

I think I found the answer, I used the ATO program to fill my containter, the output device the solenoid runs Min On time and Max on Time with the time I want it to run and it stops after the desired time.