Firmware 323 0-10V Pump Missing

[cswanson420]

I just installed a Wave Engine and I want to use the 0-10V pump type.

All of the documentation and videos clearly direct to select the 0-10V pump type.

This type is not present on firmware 323.

As of June 25th, 2024, according to the app, firmware 323 is the latest.

Is this a bug, is the 0-10V pump removed, or is activation of the 0-10V pump hidden behind other features that need to be activated.

 

[Michael]

Which wave Engine did you purchase? The Wave Engine V2 or the Wave Engine LE?

 

[cswanson420]

I purchased the Octo-4 pump.

The Wave Engine LE was the controller in the box.

 

[Michael]

I purchased the Octo-4 pump.

The Wave Engine LE was the controller in the box.

The OCTO-4 pump direct connects to the Wave Engine LE using the adapter cable .

The Wave Engine LE has a 0-10v INPUT Port for things like button boxes and float switches. The Wave Engine LE does not have a 0-10v OUTPUT Port . The OUTPUT 0-10v allows you to control other pumps using a Hydros 0-10v Cable to the OEM style controller that has a 0-10v port.

If you wanted to control other pumps using the 0-10V OUTPUT then you should have purchased either a Hydros Control X4 or Wave Engine V2. Those controllers have the 0-10V OUTPUT Port.

The Documentation of the Wave Engine le can be found here: CoralVue HYDROS

The Documentation for the Wave Engine v2 can be found here: CoralVue HYDROS

The Documentation for the Hydros X4 can be found here : Control 4 - HYDROS

 

[cswanson420]

Thank you.

I shall be writing CoralVue they have a failed product.

Including a controller that does not support a feature inherent with the Octopulse 4 pump is very bad marketing.

Furthermore, I wanted the original controller that CoralVue discontinued. The vendor even displayed the old controller on the website.