Float switch reading wrong

[leepink23]

I am a new Hydros user, have successfully created my collective with a wave engine, minnow, x4, xp8. Everything is working as expected except the float switch connected to a sense port on the minnow. It reads wet when dry and dry when wet. Any suggestions on how to get this to show correct? I was able to get it to alarm when dry so that is functioning properly.

 

[Michael]

I am a new Hydros user, have successfully created my collective with a wave engine, minnow, x4, xp8. Everything is working as expected except the float switch connected to a sense port on the minnow. It reads wet when dry and dry when wet. Any suggestions on how to get this to show correct? I was able to get it to alarm when dry so that is functioning properly.

There is a clip on the bottom of the float that can be removed. The take the float off and flip it over and re install the clip.

 

[leepink23]

There is a clip on the bottom of the float that can be removed. The take the float off and flip it over and re install the clip.

That’s awesome! Thank you!!!