Hydros Control DC Micro Pump

[nanderson0124]

So I purchased two Hydros Control DC Micro Pumps and the 5/16th output is being a little problematic. Most of the fluidized reactors only have inputs for 1/2 inch lines, but finding any sharkbite or other adapter is almost impossible. Does anyone have any good places or ideas?
No Lowes, Ace Hardware, and Home Depot are not good options as I have looked. Thanks in advance.

 

[TragicDog]

I know you said you looked at home depot, but would John Guest 5/16 in. x 1/4 in. Push-To-Connect Polypropylene Reducing Coupling Fitting-803259 - The Home Depot work?

 

[nanderson0124]

So you would be going down in size. I need to go from 5/16th inch to 1/2 inch. Thank you for the suggestion though.

 

[TragicDog]

Have you checked out McMaster-Carr? McMaster-Carr

 

[MGarrison]

I just used a barb fitting ( Mur-lok Stem Adapter Tube x Hose Stem ) from the pump to the barb I used some silicon hose and secured it with zip ties.

 

[kl3377]

I had to zip tie the vinyl tubing to my DC Micro as well. The tubing would eventually get pushed out by flow when my ATO turned on, would be helpful if pump came with connection adapters.