HYDROS WaveEngine Direct Drive Pump Adapters connector pictures

  • Thread starter Thread starter Raiden
  • Start date Start date
  • Tagged users None

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

R

Raiden

Member
Joined
Mar 28, 2022
Messages
181
Reaction score
14
Location
Orlando, FL
www.coralvue.com

HYDROS WaveEngine Direct Drive Pump Adapters

For many pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.
www.coralvue.com www.coralvue.com

Is it possible to get pump side connector pictures for these?

I'm trying to power new Gyre XF350 with Hydros, but connector I've been used with older one is not quite right. New pump connector has 3 walls separating pins, so it can't be inserted, unless I go and dremel those walls out :)

So I'm hoping one of the existing connectors has 3 lines drilled out of them already, just want to make sure before buying.

Thanks!
 
I wonder if it has been changed. I have never seen one like that. They may have changed the whole thing, I see a new controller for it..
Coralvue no longer carries Maxspect so I wonder if they were even notified of the change.
 
I know, still trying to connect it to hydros before I get their controller.

Mostly wondering what this one looks like (not that it's in stock) :)

HYDROS Maxspect Gyre XF330/350 WaveEngine Pump Adapter
SKU: HDRS-WE-300PA
 
I was going to check last night but ended up leaving for the night. I will check tonight, I do not believe I have that model though. I have a few of the older models but most of my new ones are the IceCaps gyres. I will check just incase. So if someone else has one please post it.
If I forget bump this again.
 
Ok, thanks.

I did just cut up the connector to mate them, although even the threaded part is different and nut part will not go over the other side to secure things, not that it's a huge deal in this application.

But aside from some hacking at rubber and not fully sealed connection, new XF350 cloud edition seem to work fine, granted I can't report if it's working to its full potential aside from that it is reporting around 50 watt power draw (this matches its spec) and 930 rpm.
 
What was your old adapter for? was it the HYDROS Maxspect Gyre XF150/250/280 adapter or HYDROS Maxspect Gyre XF130/230? I think those are different from the HYDROS Maxspect Gyre XF330/350 adapter. I have a 330/350 adapter at home just have to remember to look, i THINK from memory it has the inserts in it.
 
Old pump is 4K Gyre Flow Pump (4000 GPH) with WaveEngine LE Controller - IceCap, not sure on exact cable model, but worked with that pump.
 
You must log in or register to reply here.
Back
Top