Is there a way....

[IvanW]

Is there a way to check what force ports have been used on a Kraken without opening every tile.
One of my pumps was connected to force port 1 on the Kraken, I noticed the pump was not working but could not find the tile, I set up a new port but have no idea how to find the original port.

 

[Danny]

Is there a way to check what force ports have been used on a Kraken without opening every tile.
One of my pumps was connected to force port 1 on the Kraken, I noticed the pump was not working but could not find the tile, I set up a new port but have no idea how to find the original port.

You cannot use it in more than one output so you will have to delete it from the original output first. Your output may not be viewable on your page. Click and hold one of the output tiles for a second and release. Now all outputs should be there and have check boxes. Make sure the ones you want to show on that particular page are checked in the check boxes. This also works for the other categories as well. That way you can setup each page with just the inputs and outputs you want to show on that page.

 

[thom_smith]

If you know which control the output is on but unsure which port or what you may have named it, got left dropdown the DEVICES and select the control. Once selected, you will see all configured outputs. If the output is configured but doesn't appear on your status screen then you either have the Is Invisible flag on in the output config or you have hidden the tile on your status screen. Click AND hold on tiles in the status screen to re-arrange and hide/unhide tiles. Remain on that screen for 30-45 seconds before going elsewhere or closing the app and it will automatically save your changes.