Notification delay

[John Neuzil]

I would like to be able to delay notifications on specific sensors. For instance I have a level sensor in my sump to notify if the level is too high. Trouble is it goes off in feed mode when the pump is off. I would like to disable it for a set time during feed mode.

 

[Danny]

I would like to be able to delay notifications on specific sensors. For instance I have a level sensor in my sump to notify if the level is too high. Trouble is it goes off in feed mode when the pump is off. I would like to disable it for a set time during feed mode.

use an output with that sensor as the input and set the maximum on time for the amount of delay. then set the alert level to the level you want. You will get an alert if that output is on longer than the maximum on time.

 

[John Neuzil]

use an output with that sensor as the input and set the maximum on time for the amount of delay. then set the alert level to the level you want. You will get an alert if that output is on longer than the maximum on time.

Thanks, I'll try that

 

[Danny]

Thanks, I'll try that

I forgot to mention you will have to set alert to none on the input settings to stop that alert.

 

[cichlider]

Thank you @Danny that delayed alert is exactly what I was needing to set up.