Setting pH rules

[tonybuonantuono]

Using hyrdos to help control my pH. Using a co2 scrubber on the Skimmer. Want to have Skimmer go off at 8.35 and come back on at 8.30. Problem is that the rules don't allow tenths of a point event though the hydros ph reads in tenths. So options are to set to 8.2 and wouldn't come on until I drop to 8.19. If I set to 8.30 on I would have to set off to 8.4 which is to high as ph rises during day and could approach 8.5.
Seems like a simple programming change to add tenths to the rules

 

[MMcKenna1029]

Sending this back to the top.

I am having the same issue. Using this to assist in any type of PH control is not working. My swing is only .08. Would like to remove all swing and have the methods to do it but the controller will not support. Can we get this updated?

Thanks,
Matt

 

[Minibikemike]

Yes please, I would also like to control PH 8.30 to 8.35

 

[MMcKenna1029]

Sending this back to the top again...

I really like the hydros controller but am frustrated with the lack of updates for items which seem like they should be simple...

1. PH needs to be 2 decimal control
2. Why do I have to lie to my dosing pump.... Its ridiculous.... There should be no max....

Why can't we just get this stuff done?

 

[tonybuonantuono]

Seems like this would be a simple fix if someone looked at it, add a decimal place

 

[BAMatter]

Seems like this would be a simple fix if someone looked at it, add a decimal place

Appears as though this has been done, correct?

 

[Danny]

Appears as though this has been done, correct?

I think it was in the last update.