Simple Sole schedule

[Cali9dub]

For the life of me I can’t quite figure out a simple dosing schedule for my sole. I created a dosing regimen that I dose 6,000ml/day in 12 intervals…so every 2 hours. Now that I have that schedule created how do I get the sole to implement it. Pimp does nothing every 2 hours.

 

[Danny]

For the life of me I can’t quite figure out a simple dosing schedule for my sole. I created a dosing regimen that I dose 6,000ml/day in 12 intervals…so every 2 hours. Now that I have that schedule created how do I get the sole to implement it. Pimp does nothing every 2 hours.

Do you have the power supply for the Sole plugged into the controller and plugged it to a wall outlet. The pump will not run without power to that power port.

 

[Cali9dub]

Do you have the power supply for the Sole plugged into the controller and plugged it to a wall outlet. The pump will not run without power to that power port.

Using it as a stand alone. Yes it’s power supply is plugged in.

 

[Cali9dub]

Turns out you can’t run any test schedule without calibrating the unit first. So after calibration it worked however the output showed 88.9. Not sure if the pump still needed to pump 88.9ml to make it to the 500ml scheduled or if it only dosed 88.9ml. I would think it would show exactly what it dosed as opposed to whatever this number is. With no type of operating manual it’s hard to know what this thing is trying to do.

 

[Danny]

Turns out you can’t run any test schedule without calibrating the unit first. So after calibration it worked however the output showed 88.9. Not sure if the pump still needed to pump 88.9ml to make it to the 500ml scheduled or if it only dosed 88.9ml. I would think it would show exactly what it dosed as opposed to whatever this number is. With no type of operating manual it’s hard to know what this thing is trying to do.

I think this was answered on the R2R thread. If not let me know.

 

[Cali9dub]

I got it figured out for now. lol

 

[thom_smith]

As the doser is actively running, the output tile will display the remaining dosage. A few moments after the dose is complwtes the volume dosed will appear in the logs. The timestamp will be when the dose was completed.

Online manual is at HYDROS Control - HYDROS.