Search results

Probably a bad registration. Did you recently try to add a device or collective to your account?

Have you tried a different pH probe?

How did you obtain the 6.5 and 6.8? Try to calibrate the pump but only for 4.01 and 7.01. There is no need to calibrate at 10.01.

Do the following: Delete the input from HYDROS Recreate the input but give it a DIFFERENT name DO NOT calibrate the probe Upload changes What does it read now? HYDROS does not discriminate between salt and freshwater. The HYDROS gets the reading from the probe and displays it on the app. It...

There are no other reported issues or server problems that we know. Were you able to access the App?

Next time something like that happens, please contact us at CoralVue Support Portal. If we can connect to the unit from here, we can troubleshoot and possibly find a solution. We will try to recreate the problem here, but sometimes, it proves to be challenging. If we can recreate the problem...

Once the internet goes out, the HYDROS goes into WiFi recovery routines. The longer the internet is out, the more significant the gap between each recovery cycle. Depending on how long the internet was out and where during the cycle the internet returns, it might take a few seconds or a few...

What was the color of the STATUS led on the XP8 when it restarted, but the app was reporting it as not available?

You cannot stop the EcoTech Vortechs entirely as the manufacturer does not allow it. The controller can ramp down to 1%, but the only way to stop the pump is to kill the power completely.

Check the time zone setting on the options page. By default, the controller lights turn OFF at night. If the time zone is not set correctly, it might explain the issue.

Nice! A couple of things for others to remember: If you pause the "Schedule," it will only affect the AWC If you pause the AWC Output, it will affect BOTH the AWC as well as the ATO So remember to pause the "schedule" and not the Output.

We are not at liberty to say at this time as we do not want to give the competition a heads up, but I can say that, in all likelihood, it will connect to a sense port.

You won't be able to use power monitoring because the InkBird turns the heater on and off and not the HYDROS. The HYDROS won't know when the heater is on or off. The InkBird will draw some power regardless of the heater being on or off. This means that it is perfectly fine for the outlet to...

The problem with using the InkBird as your primary temperature controller is that you are rendering the power monitoring feature on the XP8 outlet useless. This is because you are turning the XP8 outlet on 24/7 regardless of the need for the heater to be on or off. I recommend you make the...

Tuesday, May 3, 2022 @ 22:26 Amazon got things fixed, and items are starting to come back to normal. The cloud service is back up. HYDROS devices will eventually reconnect but power them down and up again if you want to speed up the reconnect routine. If the devices are ok, but your app is...

Tuesday, May 3, 2022 @ 21:45 It looks like AWS is having issues affecting HYDROS Cloud connectivity. - Your devices will be breathing yellow and sometimes red - You will not have connectivity on the HYDROS app - You will not be able to make any configuration changes while the cloud connection...

It "looks" like they are compatible, but you will need to create your cable, which will be something like this: https://forum.coralvuehydros.com/threads/aquaticlife-hybrid-t5-dimmable.573/ The 0-10V OUTPUT is most likely a way for one light to pass the commands from the controller to the next...

You define it when you define the schedule: https://www.coralvuehydros.com/product-support/hydros-waveengine/add-flow-pump-schedule/

The problem here is the Stale Dose = 0. One of the features of DYNAMIC Dosing is to allow you to increase or decrease levels AND maintain them. For example, let's take Alkalinity. You figure out that your tank consumes 100ml to keep the alkalinity at 8dKH. 100ml does not increase or...

We fixed this, and it will be included in the next version of the app and firmware. Thank you for catching it and letting us know!