3/4" Flow sensor

[jhov2324]

Hello, I installed the hydros flow sensor. When adding it to the inputs what flow rate model do I select?

Fm 025. Fm 050 fm 075

It gives different readings according to the model I select and FM 025 gives a flow rate that can't be right.

 

[Michael]

Hello, I installed the hydros flow sensor. When adding it to the inputs what flow rate model do I select?

Fm 025. Fm 050 fm 075

It gives different readings according to the model I select and FM 025 gives a flow rate that can't be right.

Can you post a picture of the flow sensor you have ?

 

[jhov2324]

This is the one I got

 

[Michael]

You want to select FM 075

 

[jhov2324]

Thank you very much....that number looks much better.... although as per UV I need to be at 214 gph..... for parasite control. I'll turn up the pump see if I get more through my manifold.

 

[Michael]

Thank you very much....that number looks much better.... although as per UV I need to be at 214 gph..... for parasite control. I'll turn up the pump see if I get more through my manifold.

You're very welcome. Make sure to clean it at least every 3 months or so.